DIY Paint Roller Tray

A simple paint roller tray is something that every homeowner can create from scrap wood. Instead of purchasing one, you can make your own from scrap plywood. Cut a piece of plywood into a flat box with a tilted bottom. Then, cover the bottom with latex caulking and paint the inside. The coating will keep your rollers from getting drenched in paint. If you plan to paint multiple colors, it is best to purchase a metal roller tray. Otherwise, you can always use disposable plastic liners.

Another easy-to-make paint roller tray is a small wood block. This will prevent the lid from dinging. To make it fit tightly, choose a block with a diameter that is slightly larger than the paint can. Next, hammer the center of the block to seal the lid. Rotate the block a few times and repeat as needed. Cutting in is a tricky skill, so practice is key.

If you aren't a handyman, you can purchase a plastic or aluminum paint tray for your home. These come in standard sizes, 7 inches and nine inches. You can also find ones with hooks that attach to a ladder. And, since they're washable, you won't have to worry about clean-up, either. You can also buy aluminum foil or disposable plastic tray liners. But if you're not sure whether to purchase one or make your own, check out these tips.

Next, cover the paint roller tray with saran wrap. Make sure that it fits tightly and securely onto the tray. Then, place the loose end of the saran wrap on one side and wrap the remainder of the tray above and below. Do this 4-5 times. Once you're satisfied with the look of your DIY paint roller tray, you'll be able to use it for several more projects. After completing your DIY paint roller tray, you can begin painting!

Using a piece of aluminum foil, you can line the roller tray with cling wrap and reuse it for multiple paint jobs. If you have a large tray, you can use extra-wide foil and then crimp it down with your hands and palms. This will keep your paint fresh without spills. If you plan to reuse the tray, just put the liners back in between paint changes or breaks. And don't forget to wipe your DIY paint roller tray with a damp towel.

For a standard nine-inch roller, you can use a potato chip container. This container's lid makes it the perfect size to hold a paint roller. You can also use it to store both dry and wet rollers. And, of course, you can always purchase disposable ones if you need them for your workshop. If you don't want to use a plastic container, a potato chip box will do the trick.

If you're looking for a paint roller tray, consider using a container with a zipper. It can be used for storage and can double as a glider when moving heavy furniture. In addition to being reusable, paint roller trays can be easily cleaned with soap and water or even power washed. Using a plastic bag can keep your rollers from drying out and keep them clean. You can even reuse your paint roller trays again!

While a paint roller tray can save you time on your painting project, it can be a messy affair. To avoid this, you can buy a liner that protects the bottom of the tray. To clean your paint tray, you can fill it with warm water and use a brush comb to remove excess paint. Then, rinse the tray with the water and wipe it clean. When you're finished painting, put it back into its container to save space.

When painting flat surfaces, rollers can help you complete the job faster than brushes. Brushes, however, are mainly used for trimming and around doors and windows. Paint rollers can be found in different widths, ranging from four inches to 18 inches. The most common interior roller size is seven inches, but there are several other sizes available. If you're using rollers for a flat area, be sure to buy a roller that fits around the items you're painting.