#SFP0361
Trim Wall Guide Roller Paint Edging Tool Clean-Cut Paint Edger Roller Corner Brush
Features:
1. Rollers are washable and reusable.
2. No-smear shield design eliminates smearing paint along trim.
3. Adjustable Precision brush cuts paint in exactly to the edge of the wall.
4. Combination of roller, shield, and brush ensures quick painting and exact lines.
Model |
SFP0361 |
|
Paint roller cover |
Material |
Acrylic fiber |
Size |
2, 3, 4 inch |
|
Paint roller frame |
Material |
New PP and steel rod |
Type |
Single rod frame |
|
Paint roller handle |
Material |
Iron handle or plastic handle |
Color |
White, Yellow Blue or customized design |
|
Size |
2, 3, 4 inch or customized design |
Advantage:
1. This technology will eliminate hours of tedious work required to tape and / or cut in by hand.
2. Greatly reduces the time spent applying masking tape.
3. Paints 10-20 times faster than a sash brush.
4. Reduces the number of painters needed on a job by 50% or more.
5. Ensures that even painters with little or no experience can paint consistent, straight edges with no paint on the trim.
Specification:
Brush material: cotton thread
Application: Doors, Window, Ceilings, Accent Walls, Baseboards, Chair Rail
Size: 260*127*50mm/10.2*5.00*1.97"
Instructions:
Instructions for Use
Pour a small amount of paint into the deep end of a paint tray.
Push roller into paint, but do not cover axle.
Roll roller backwards and forwards over the ribbed section of the tray to evenly disperse paint over the refill.
Apply paint using long, even strokes in all directions.
Avoid using rapid strokes as this could cause the paint to splatter.
Always work from unpainted surface to painted surface to avoid lines.
Instructions for Clean
Clean roller and tray immediately after use.
Return excess paint to the tin and wipe tray with a cloth or paper towel and clean with warm soapy water. Rinse well.
Remove excess paint from refill by rolling on a newspaper.
Remove refill head and clean thoroughly with warm soapy water. Rinse well in running water until water runs clear.
Shake excess water from roller and hang up to dry naturally, away from direct heat.