Drywall Taping Seam Tape High Strength Self-Adhesive Fiberglass Cloth Mesh Joint Tape Fabric Roll for Plasterboard Repair Tool

Application Method:
1. Kept wall clean and dry.
2. Attach tape in the cracks and compression.
3. Confirmed that gap has been covered tape, then use a knife to cut off it, at last brush on the plaster.
4. Let it nature dry, then gently polishing.
5. Fill enough paint to make it smooth
6. Leaked tape removed. Then, pay attention to all cracks are properly repaired, with subtle seam of composite materials will complement the surrounding modified to make it bright and clean as new.

Repairing the cracks and joints of drywall, plaster board and other wall surface

-Good performance of alkalin-resistance

-High tensile strength and deformation resistance

-Excellent self-adhesive performance, well arranged

-Simple and easy to be applied

Fiberglass self-adhesive mesh tape, is a kind of fiberglass mesh as basis material coated with adhesive glue,then cut into the required sizes. It is widely used for reinforcing wall surfaces in buildings, repairing the cracks and joints of drywall,plasterboard and other wall surface.

Instructions：

Instructions for Use
Pour a small amount of paint into the deep end of a paint tray.
Push roller into paint, but do not cover axle.
Roll roller backwards and forwards over the ribbed section of the tray to evenly disperse paint over the refill.
Apply paint using long, even strokes in all directions.
Avoid using rapid strokes as this could cause the paint to splatter.
Always work from unpainted surface to painted surface to avoid lines.

Instructions for Clean
Clean roller and tray immediately after use.
Return excess paint to the tin and wipe tray with a cloth or paper towel and clean with warm soapy water. Rinse well.
Remove excess paint from refill by rolling on a newspaper.
Remove refill head and clean thoroughly with warm soapy water. Rinse well in running water until water runs clear.
Shake excess water from roller and hang up to dry naturally, away from direct heat.