ITEM# SFP0281
EU Style 4 Inch Paint Roller Frame Galvanized with Plastic Long Handle
1pc roller cover, 7-15mm nap, pp core
1pc roller frame, single wire 5.7mm rod, zinc plated; plastic handle.
Handle Material |
with steel handle |
Handle Feature |
Heavy duty handle with steel ring |
Dia |
6mm ,8mm |
Surface treatment |
chrome plated |
Color |
Yellow black green white red blue |
Application |
For using with water-based paint , emulsion paint &wallpaper paint |
OEM |
Accept OEM |
Logo |
Customized Logo |
Package |
1 pcs/opp bag as your requirement |
Sample lead time |
About 7 days |
Delivery Time |
Shipped in 35 days after payment |
Place Of Origin |
Zhejiang,China |
Payment |
L/C, T/T, Western Union, Paypal.etc. |
Remark |
Different color,size,shape are available. |
- Oil based paints:
Immediately after use rinse out in appropriate solvent to remove most of the paint .Than wash in warm soapy
water, rinsing again with clear water or rub with dry cloth .When dry store in bag .
- Water based paints:
Remove as much of the excess paint immediately after use with clean water.Wash with soapy and warm water,
rinse again with the clean water. Spin roller or rub with dry cloth.When dry store in bag.
Attach roller refill to the roller frame after removing extra hair from the roller refill
Soak the roller refill in the thinner applicable to the paint,then roll over the roller on the roller net to get attached
fill the paint in the roller bucket.
Soak the roller refill into the paint, then roll over the refill on the roller net a few times
Move the roller as if drawing a big “W”,then shift in the order : up , down , left and right to apply paints thoroughly
Instructions:
1.First remove the fur of the roller surface, then cover on the frame.
2.Roll the roller on the net after diping the roller into the dilute coating which be used.
3.To make the roller paint even, dip the roller into the coating, then roll on the net for seconds.
4.First roll the coating as writing “W”, then roll from top to bottom, left and right, make the coating shapely on the wall.
Instructions for Use
Pour a small amount of paint into the deep end of a paint tray.
Push roller into paint, but do not cover axle.
Roll roller backwards and forwards over the ribbed section of the tray to evenly disperse paint over the refill.
Apply paint using long, even strokes in all directions.
Avoid using rapid strokes as this could cause the paint to splatter.
Always work from unpainted surface to painted surface to avoid lines.
Instructions for Clean
Clean roller and tray immediately after use.
Return excess paint to the tin and wipe tray with a cloth or paper towel and clean with warm soapy water. Rinse well.
Remove excess paint from refill by rolling on a newspaper.
Remove refill head and clean thoroughly with warm soapy water. Rinse well in running water until water runs clear.
Shake excess water from roller and hang up to dry naturally, away from direct heat.