#SFP6990
Sanfine Airless Paint Sprayer High Efficiency Diaphragm Pump Spraying Machine
1. Voltage: 220-240V/50Hz
2. Max.volume flow: 3.0-10.0L/MIN
3. Power: 1500-4000W/50HZ
4. Nozzle diameter: 0.015MM-0.025MM
5. Max.viscosity: <20000PAS
6. Maximum pressure: 3000N/S.
7. Auto-cleaning reversible airless tip. Swivel-free inlet connector.
8. Anodized aluminum Forged gun body for light weight and high pressure.
Model | SFP6990 |
Spray material | Viscosity internal wall paint, oil paint and protective coating |
Air consumption: | 120-150 |
Max nozzle size: | 517-625 |
Max flow | 3.0-8.0 L/min |
Max work pressure: | 3200 N/S |
Power consumption: | 1500-4000W |
Voltage/ frequency: | AC 220V-240V, 50HZ/60HZ |
Weight: | 45 KG |
Motor: | Constant speed motor drive |
High-Pressure Airless:
Airless paint sprayer has the high-pressure spray gun that created the fan-shaped spray,
with uniform thickness and a high utilization rate. Besides,
an airless sprayer hose is also equipped with high-pressure technology that can decrease overspray by up to 55%.
Powerful & Low Noise:
1500w cart airless paint sprayer is consisted of a copper core DC motor,
which can work continuously but not heat. Heat dissipation is faster and efficient.
High load-bearing is superior in high wear resistance and low noise,
providing a more comfortable work atmosphere.
Controllable Large Flow:
This commercial paint sprayer contains an aluminum piston pump
that you can use the machine in the large flow for a long time.
The max flow rate is 1GPM. Thanks to the pressure regulating valve, y
ou can control the flow by adjusting the pressure as you wish.
Strong & Sturdy Frame:
Airless paint sprayer with cart is constructed by stainless steel frame and armrest,
more sturdy and durable. Rubber tires are not only so solid and hard to damage but also easy to transport.
You can use them in any place.
Complete Accessories:
Our products are fully equipped.
The extension bar and different kinds of Tips make your work more convenient.
Furthermore, you can clean the machine more quickly and neatly with the spray gun filters.
Applications: Construction, home decoration construction, color tile industry, water-based,
oil-based paint construction, steel surface, epoxy floor, marine paint spraying construction.
Paint Preparation and Filling:
Note: Proper paint mixture is essential. Follow the manufacturer's directions.
Most paints will spray easily if they are thinned properly.
1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.
2. Thin the paint according to manufacturer's directions and mix thoroughly.
3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.
Before First Use:
NOTICE: Before first use, clean the Spray Gun thoroughly.
If not removed, the material used for testing and corrosion prevention will contaminate paint.
Spraying Technique:
CAUTION: DO NOT STOP WHEN SPRAYING.
Spraying materials will start to set and dry.as soon as they come in contact with the air.
They will cause a permanent clog if not cleared.If discontinuing spraying for more than half an hour,
turn off the air supply, disconnect Cup from Gun Body and throughly rinse Cup and Gun with clean water.