Professional Airless Spraying Machine with Pure Copper Motor Spray Gun Airless Paint Sprayer Painting Device Tools

Product Description：
#SFP4995
Professional Airless Spraying Machine Paint Sprayer Painting Device Tools

1. Voltage: 220-240V/50Hz
2. Max.volume flow: 3.0-10.0L/MIN
3. Power: 3000-4000W/50HZ
4. Nozzle diameter: 0.015MM-0.025MM
5. Max.viscosity: <20000PAS
6. Maximum pressure: 3500N/S.
7. Auto-cleaning reversible airless tip. Swivel-free inlet connector. 
8. Anodized aluminum Forged gun body for light weight and high pressure.

Commonly used spraying: Latex paint. Nippon Paint. Paint. Exterior paint.

Color, varnish, high viscosity latex paint, oil-based paint, and so on.

Applications: Construction, home decoration construction, color tile industry, water-based, oil-based paint construction, steel surface, epoxy floor, marine paint spraying construction.

Paint Preparation and Filling:
Note: Proper paint mixture is essential. Follow the manufacturer's directions.
          Most paints will spray easily if they are thinned properly.
1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.
2. Thin the paint according to manufacturer's directions and mix thoroughly.
3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.

Before First Use:
NOTICE: Before first use, clean the Spray Gun thoroughly.
If not removed, the material used for testing and corrosion prevention will contaminate paint.

Spraying Technique:
CAUTION: DO NOT STOP WHEN SPRAYING.
Spraying materials will start to set and dry.as soon as they come in contact with the air.
They will cause a permanent clog if not cleared. If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun with clean water.